On 965 and up, if we detect a full height blit, we should just wait for
vblank, rather than try to do a scanline wait for the whole display.
On pre-965, doing a scanline wait followed by a blit works, but in the
full height case we need to give the blitter time to start up, so we
wait until the bottom line of the blit minus 2 padding scanlines to
accommodate.
Fixes FDO bug #22475.
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
This keeps us from trying to set tiling on it while pinned, which also
keeps us from trying to unpin it in the kernel, causing an error.
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Check for page flipping support before enabling flip and vblank event
support needed for the new DRI2 APIs.
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
With DRI2 supporting multiple subsystems, the video driver must
initialize the list of driver names instead of just passing the single
driver name used by Mesa. Without this, the X server will fail to
initialize DRI2 as the numDrivers field in this structure will be
uninitialized.
Signed-off-by: Keith Packard <keithp@keithp.com>
Of course, it's still fail since you can't correctly composite
colorkey overlay, but at least this doesn't spam colorkey to the root
window.
Tested-by: Daniel Vetter <daniel@ffwll.ch>
If we get to the point where we check the divisor/remainder equation and
it's satisfied, we should complete the swap immediately.
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
The new interfaces allow for improved buffer swap, and support for the
SGI_swap_control, SGI_video_sync and OML_sync_control GLX extensions.
The Intel implementation allows page flipping to occur for swaps that
are full screen and not rotated.
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
The PRM (Vol 1, p32) specifies that the URB_FENCE command must not cross
a cache-line boundary (64-bytes) in order to workaround a silicon issue.
Ensure that it does not by inserting an alignment point before the atomic
section.
This is a slightly too large hammer, but the easiest method to work with
the current BEGIN_BATCH/ADVANCE_BATCH protections.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
The mapping type to use is determined by the tiling of the underlying
object, not by whether or not not we control the vt. This was a
left-over wart that was intended to mean that we had GEM and so could
use GTT mappings.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Add a small wrapper function so that the callsites need only call the
single function when checking the available aperture size for
determining the maximum viable size for operations. This will allow us
to easily extend this set in the future by only needing to adding the
check to a single location.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
This just makes it _really_ clear, what's supported. No other changes.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Eric Anholt <eric@anholt.net>
It's now all in I830PutImageTextured. Also kill some leftovers
from XVMC-on-overlay support and ums-XVMC-on-i915 support. Plus
a small comment as a reminder for where to add i915 xvmc support
back in.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Eric Anholt <eric@anholt.net>
I'm still curious as to why fixed-point semantics are necessary
for this generic XV helper function that's been causing all this.
Can modern X really run on hw without floating-point support?
Anyway, the ugliness is now all nicely under the carpet (in
i830_clip_video_helper).
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Eric Anholt <eric@anholt.net>
After this there are no other external users of these strange variables,
so we can nicely hide them somewhere in the next changeset.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Eric Anholt <eric@anholt.net>
This is the first part of my small crusade to rip out x1, x2, y1, y2
from I830PutImage*. These variables have strange semantics (they
change from simple integers to fixed-point values somewhere in
the middle) and don't really seem to be what we actually need.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Eric Anholt <eric@anholt.net>
We always pass a non-null pointer for crtc_ret, no point to check
for this.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Eric Anholt <eric@anholt.net>
This wasn't making much sense anymore, and further cleanups will
make this even more apparent. This change just makes two copies of
I830PutImage and kills the not-applicable if-clauses in both
versions.
There is one small functional change in here: The textured video
path doesn't munch around with adaptor_priv->videoStatus anymore,
which is only used by the overlay. This could prevent the overlay
from being switched off if someone would use textured video at the
same time.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Eric Anholt <eric@anholt.net>
The variable "intel" is unused when building i830_video.c without XvMC
support which results in a compiler warning:
i830_video.c: In function 'i830_copy_video_data':
i830_video.c:1443: warning: unused variable `intel'
Trivial fix via #ifdef.
Now that libdrm 2.4.16 is released (and already required) we can
unconditionally enable this.
Please add something like this to the release-notes/NEWS file:
* Overlay support for kernel modesetting. This needs at least kernel
v2.6.33 to work. A backport to 2.6.32 is available at:
http://gitorious.org/daniel-s-linux-stuff/linux-kernel/commits/intel-kms-overlay-for-2.6.32
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This reverts commit 3f11bbec42.
For unknown reasons, enabling tiling for the glyph cache is causing
glyph corruption both across suspend and resume and VT switching, on a
wide range of chipsets (reports include both i8xx and gm45)
This strongly suggests that we are handling tiling, or updates to tiled
buffers, incorrectly across i915_gem_idle(). However, until we can find
the root cause, we want to fix this regression before the next stable
release, so simply revert this patch. :(
Fixes:
[Bug 25406] fonts garbled after resuming from suspend since 6729b508http://bugs.freedesktop.org/show_bug.cgi?id=25406
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
This should restore the previous level of synchronisation between
textures and pixmaps, but *does not* guarantee that a texture will be
flushed before use. tfp should be fixed so that the ddx can submit the
batch if required to flush the pixmap.
A side-effect of this patch is to rename intel_batch_flush() to
intel_batch_submit() to reduce the confusion of executing a batch buffer
with that of emitting a MI_FLUSH.
Should fix the remaining rendering corruption involving tfp [inc compiz]:
Bug 25431 [i915 bisected] piglit/texturing_tfp regressed
http://bugs.freedesktop.org/show_bug.cgi?id=25431
Bug 25481 Wrong cursor format and cursor blink rate with compiz enabled
http://bugs.freedesktop.org/show_bug.cgi?id=25481
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
In commit 98e11210
Remove flush parameter from intel_batch_flush()
Maxi spotted that I had broken screen updating. It appears in my haste
to eliminate the extra parameter I removed a call to intel_batch_flush()
when throttling, i.e. when pushing the updates to the screen before
idling.
Should fix:
Bug 25409 [bisected] rendering corruption since a938673ehttps://bugs.freedesktop.org/show_bug.cgi?id=25409
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
If we wedge the GPU then we will return -EIO for the current batch and
then attempt to reset the GPU. Meanwhile the X server detects the error,
throws a FatalError and to all intents and purposes appears to crash to
the user - whereas before it often just appeared to momentarily freeze.
Of course, on older hardware the server remains frozen until we can find
a way to reset those GPUs at runtime.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
There is only a single caller that wishes to forcibly append a flush
into the batch: intel_sync(). So move the logic there.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
During shutdown from a FatalError during batchbuffer submission, it is
possible for the batch_ptr to be NULL, so we must be careful not to
append a flush on this error path.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Eric Anholt
Chris Wilson
Jesse Barnes
Keith Packard
Daniel Vetter
Tobias Doerffel