I still have no idea how this is triggering failures, but it is. So
revert until the problem is solved.
Should fix once again:
Bug 23803 [bisected i915] gnome characters disappear
http://bugs.freedesktop.org/show_bug.cgi?id=23803
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
I incorrectly changed the logic in 285f286 and caused the batch to
always be flushed when debugging, instead of merely inserting a MI_FLUSH
between operations.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
The compile cleanup was not without fault... Apparently I don't have
XVMC enabled anymore and so missed that this variable is actually used.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Avoid waiting on dirty buffer object by streaming the upload to a fresh,
non-GPU hot buffer and blitting to the destination.
This should help to redress the regression reported in bug 18075:
[UXA] XPutImage performance regression
https://bugs.freedesktop.org/show_bug.cgi?id=18075
Using the particular synthetic benchmark in question on a g45:
Before:
9542.910448 Ops/s; put composition (!); 15x15
5623.271889 Ops/s; put composition (!); 75x75
1685.520362 Ops/s; put composition (!); 250x250
After:
40173.865300 Ops/s; put composition (!); 15x15
28670.280612 Ops/s; put composition (!); 75x75
4794.368601 Ops/s; put composition (!); 250x250
which while not stellar performance is at least an improvement. As
anticipated this has little impact on the non-fallback RENDER paths, for
instance the current cairo-xlib backend is unaffected by this change.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
As we track when a pixmap is active inside a batch buffer, we can avoid
unnecessary flushes of the batch when mapping a pixmap back to the CPU.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Ensure that the render caches and texture caches are appropriately
flushed when switching a pixmap from a target to a source.
This should fix bug 24315,
[855GM] Rendering corruption in text (usually)
https://bugs.freedesktop.org/show_bug.cgi?id=24315
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
In order to detect when we require cache flushes we need to track which
domains the pixmap currently belongs to. So to do so we create a device
private structure to hold the extra information and hook it up.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Avoid mapping the glyph cache back to the cpu by allocating temporary
buffer objects to store the glyph pixmap and blit to the cache.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Add missing INSTALL file. Use standard GNU file on building tarball
README may have been updated
Remove AUTHORS file as it is empty and no content available yet.
Remove NEWS file as it is empty and no content available yet.
The git generated ChangeLog replaces the hand written one.
Update configure.ac to xorg-macros level 1.3.
Use XORG_DEFAULT_OPTIONS which replaces four XORG_* macros
Update Makefile.am to add ChangeLog target if missing
Remove ChangeLog from EXTRA_DIST or *CLEAN variables
This is a pre-req for the INSTALL_CMD
Using common defaults will reduce errors and maintenance.
Only the very small or inexistent custom section need periodic maintenance
when the structure of the component changes. Do not edit defaults.
Using common defaults will reduce errors and maintenance.
Only the very small or inexistent custom section need periodic maintenance
when the structure of the component changes. Do not edit defaults.
Particularly noting to route alpha to the green channel when blending
with a8 destinations.
Fixes:
rendercheck/repeat/triangles regressed
http://bugs.freedesktop.org/show_bug.cgi?id=25047
introduced with commit 14109a.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
RENDER specifies that texels should sampled from the pixel centre. This
corrects a number of failures in the cairo test suite and a few
off-by-one bug reports.
Grey border around images
https://bugs.freedesktop.org/show_bug.cgi?id=21523
Note that the earlier attempt to fix this was subverted by the buggy use
of 1x1R textures for solid sources -- which caused the majority of text
to disappear.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Instead of allocating and utilising the texture samplers for 1x1R
solid sources and masks we can simply use the default diffuse and
specular colour channels and adjust the fragment shader appropriately.
The big advantage is the reduction in size of batches which should give
a good boost to glyph performance, irrespective of the additional boost
from using simpler shaders.
However, the motivating factor behind the switch is that our use of 1x1
textures turns out to be buggy...
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
As the immediate victim of the overflow would be to overwrite the maximum
permissible value, the test was optimistic.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Since batch buffers are rarely emitted by themselves but as part of a
sequence of state and vertices, the whole sequence is emitted atomically.
Here we just enforce that batches are marked as being part of an atomic
sequence as appropriate.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
In the case of x8r8g8b8 and similar where the alpha channel is ignored,
but should be interpreted as being 1, then it is convenient if those bits
are set appropriately in the colour. In order to do so for these formats,
where PIXMAN_FORMAT_A() returns 0 we need to compute the alpha channel
width as the remaining bits instead.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
It can go up to 32k. Upping this lets me use my 2560x1600 and 1920x1200
monitors in an extended desktop configuration.
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
DEBUGFLAGS wasn't used anywhere and the configure switch is useless.
"CFLAGS=-g ./configure" does the same thing and actually works.
PKG_CHECK_MODULES already calls AC_SUBST, no need to do it twice.
Signed-off-by: Rémi Cardona <remi@gentoo.org>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
XF86DRI is defined by the SDK so not defining it here just breaks the
build. Define HAVE_DRI instead to avoid collisions.
Note: DRI2 is still enabled/disabled entirely by SDK defines.
Signed-off-by: Rémi Cardona <remi@gentoo.org>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
This avoids a crash when an XRenderComposite call is made with a
-1 value for width/height, (which apparently compiz's gtk-window-
decorator likes to do). Fixes bug:
X crashes in uxa_acquire_pattern when logging in (gdm)
http://bugs.freedesktop.org/show_bug.cgi?id=24724
Signed-off-by: Albert Damen <albrt@gmx.net>
Reviewed-by: Carl Worth <cworth@cworth.org>
Remove bo pin for surface buffer access, and remove access
attempt for possible unmapped framebuffer. Using xv buffer
pointer to pass current xvmc surface bo handler, which is
assigned to src image bo and handle that the same way as in Xv.
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
[anholt: Fixed up for conflict against the XV rework. Not tested, because
both mplayer and xine segfault with XVMC currently.]
Signed-off-by: Eric Anholt <eric@anholt.net>
While copying and rotating the buffer, array access was out of bounds when
rotated to the right (RR_Rotate_270). My buffer handling changes probably
made this bug much more likely to actually result in a SIGSEGV.
I've checked the logs and the bug exists since rotation has been supported,
i.e. this looks like a candidate for cherry-picking for all supported
releases.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Eric Anholt <eric@anholt.net>
Kill some unnecessary stuff. Small code changes, but no functional ones.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Eric Anholt <eric@anholt.net>
This code didn't survive the global renaming of vars to saner names.
Fix it up.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Eric Anholt <eric@anholt.net>
Mostly unused definitions and variables, but also some strange ums
debug code. Also kill some now obsolete comments.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Eric Anholt <eric@anholt.net>
If DEBUG_FLUSH_CACHES is enabled then emit a MI_FLUSH after every
rendering operation. This is intended to 'fix' cases where we are
missing a required flush in the middle of a sequence of operations, such
as switching between 2D to 3D and render to sampler.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Make the following options available via xorg.conf:
Section "Driver"
Option "DebugFlushBatches" "1" # Flush the batch buffer after every
# single operation;
Option "DebugFlushCaches" "1" # Include a MI_FLUSH at the end of every
# batch buffer to force data to be
# flushed out of cache and into memory
# before the completion of the batch.
Option "DebugWait" "1" # Wait for the completion of every batch buffer
# before continuing, i.e. perform synchronous
# rendering.
EndSection
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Failure to do so causes xrandr to report incorrect property values.
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Chris Wilson
Gaetan Nadon
Daniel Kahn Gillmor
Eric Anholt
Daniel Vetter
Jesse Barnes
Rémi Cardona
Albert Damen
Thomas Arnhold
Zhenyu Wang
Zhao Yakui